add models

.gitignore

@@ -2,3 +2,5 @@
 lib/bosl
 lib/dotSCAD-3.3
 .DS_Store
+*.stl
+lib/ub.scad

models/candle/candle.scad

@@ -1,4 +1,181 @@
-include<../lib/ub.scad>
+include <../../lib/ub.scad>;
+
+/*[Hidden]*/
+designVersion="1.0";
+designer="Andey Belvedersky";
+
+useVersion=24.260;
+assert(Version>=useVersion,str("lib version ",Version," detected, install ",useVersion," ub.scad library‼ ⇒http://v.gd/ubaer"));
+
+license="CC0";
+/*[Basics]*/
+nozzle=.6;
+bed=false;
+pPos=[10,10];
+info=true;
+name=undef;
+
+
+// translate([10,0,-15]){
+// %cylinder(h = 20, r1 = 22, r2 = 20, $fn = 100);
+// }
+
+// intersection() {
+//   cylinder(h = 120, r1 = 10, r2 = 10, $fn = 100);
+//   translate([0,0,0]){
+//     Coil(10, grad=4635,rot=2,points=Kreis(6,rand=0),help=true);
+//   }
+// }
+
+Buchtung(help=true, l = 15, fn= 100, fn2=20);
+// 
+translate([15,0,0]){
+  Buchtung(help=true, l = 15,  r=[2.5, 0, 0, 0],  rmin=[2.0, 2.0, 2.0, 2.0], deltaPhi=-360, phase=360, fn= 100, fn2=20);
+}
 
 
 
+
+
+
+
+
+
+// // Parameters for the snake-like candle
+//   snake_length = 50; // Length of the candle
+//   snake_radius = 20; // Base radius of the candle
+//   twist_amount = 20; // Amount of twist in the snake shape
+//   height_variation = 6; // Variation in height to create a snake-like effect
+
+// // 
+
+
+
+// WaveEx(
+//   grad=0,
+//   h=snake_length,
+//   r=snake_radius,
+//   ry=twist_amount,
+//   f=3,
+//   fy=height_variation, // 😃
+//   a=0,
+//   ay=1.3, // 
+//   fv=1.4,
+//   fvy=4,
+//   tf=5,
+//   trx=0,
+//   try=0,
+//   tfy=3.2,
+//   tfv=6,
+//   tfvy=10,
+//   ta=1.5,
+//   tay=1.7,
+//   fn=150,
+//   fn2=150,
+//   rot=0,
+//   scale=1,
+//   scaley=1,
+//   close=false,
+//   p=4,
+//   name=undef,
+//   help=1
+// );
+
+
+
+// hull() {
+
+
+// hull() {
+
+
+
+// hull() {
+//     sphere(d=20);
+
+// translate([0,0,50]){
+// minkowski() {
+//   sphere(r = 20, d=20, $fn=5);
+//   cylinder(r=2,h=1, center=true);
+// }
+// }
+// }
+
+// translate([10,10,25]){
+
+// rotate([10,80,40])
+// minkowski() {
+//   sphere(d=20, $fn=5);
+//   cylinder(r=2,h=1, center=true);
+// }
+// }
+// }
+
+// translate([-10,-10,25]){
+//   rotate([10,30,40])
+
+// minkowski() {
+
+// OctaH(help=true, d=20);
+//   cylinder(r=2,h=1, $fn=50);
+
+// }
+// }
+// }
+
+// Spirale(help=1, grad=10, radius=0, exp=1, fn=2)Linse( messpunkt=false);
+// Rundrum(fn=40, grad=40, r=3, twist=1, x=25, y=10, r=195)Linse(help=1, dia=12, r=6.5, messpunkt=false);
+// Spirale(help=1, grad=200, radius=0, exp=1, fn=170);
+
+
+// // Parameters for the snake scales
+// scale_length = 10; // Base length of each scale
+// scale_width = 6; // Base width of each scale
+// scale_height = 2; // Base height of each scale
+// scale_spacing = 0.2; // Base spacing between scales
+// scale_rows = 3; // Number of rows of scales
+// scale_columns = 6; // Number of columns of scales
+
+// // Function to create a single scale with limited randomness
+// module scale() {
+//     // Randomize scale dimensions and rotation with less variation
+//     l = scale_length + rands(-1, 1, 1)[0]; // Limited random length variation
+//     w = scale_width + rands(-0.5, 0.5, 1)[0]; // Limited random width variation
+//     h = scale_height + rands(-0.2, 0.2, 1)[0]; // Limited random height variation
+//     rot = rands(-10, 10, -10)[0]; // Limited random rotation
+
+//     color("darkgreen") {
+//         // Create a scale shape using a rounded rectangle
+//         linear_extrude(height=h) {
+//             rotate(rot) {
+//                Linse(help=1, dia=12, r=6.5, messpunkt=false);
+//             }
+//         }
+//     }
+// }
+
+// // Function to create a row of scales with limited randomness
+// module scale_row(y_offset) {
+//     for (i = [0:scale_columns - 1]) {
+//         // Randomize the position of each scale with limited variation
+//         x_offset = i * (scale_length - scale_width + scale_spacing) + rands(-0.5, 0.5, 1)[0];
+//         translate([x_offset, y_offset, 0]) {
+//             scale();
+//         }
+//     }
+// }
+
+// // Function to create the snake scale pattern with limited randomness
+// module snake_scale_pattern() {
+//     for (j = [0:scale_rows - 1]) {
+//         // Randomize the vertical position of each row with limited variation
+//         y_offset = j * (scale_width + scale_spacing);
+//         translate([0, y_offset, 0]) {
+//             scale_row(j * (scale_width + scale_spacing));
+//         }
+//     }
+// }
+
+// // Create the snake scale pattern
+// snake_scale_pattern();
+render();

models/cup/cup.scad

@@ -1,15 +1,16 @@
-module tube(thickness, length1, length2, height, fn=100) {
+include <tube.scad>;
-    difference() {
-        cylinder(h = height, r1 = length1  , r2 = length2, $fn = fn);
-        cylinder(h = height+0.01, r1 = length1 -thickness * 2,r2 = length2 -thickness * 2, $fn = fn);
-    }
-}
 
+/*[Hidden]*/
+designVersion="1.0";
+designer="Andey Belvedersky";
+
+// minkowski() {
+    // Стакан
     union(){
         // Поднимаем на 40 мм вверх
         translate([0, 0, 40]) {
-        // Создаем трубу диаметром 140 мм, толщиной стенок 10 мм и высотой 10 мм
+            // Создаем трубу диаметром 140 мм, толщиной стенок 10 мм и высотой 10
-        tube(thickness = 10, length1 = 70, length2=70, height = 7);
+            tube(thickness = 15, length1 = 70, length2=70, height = 7);
         }
         // Создаем трубу диаметром 120 мм, толщиной стенок 5 мм и высотой 40 мм
         tube(thickness = 5, length1 = 60, length2 = 60, height = 40);
@@ -17,12 +18,13 @@ tube(thickness = 5, length1 = 60, length2 = 60, height = 40);
         // Опускаем на 40 мм вниз
         translate([0, 0, -80]) {
             union(){
-    // Создаем трубу  c начальным диаметром 120 мм, и конечным 80 мм толщиной стенок 5 мм и высотой 80 мм
+                // Создаем трубу  c начальным диаметром 120 мм, и конечным 80 мм толщиной
+                // стенок 5 мм и высотой 80 мм 
                 tube(thickness = 5, length1 = 40, length2 =60, height = 80);
                 cylinder(5, 40,40);
             }
         }
     }
-
+    // sphere(.5, $fn = 5);
+//}
 render();
-

models/cup/handle.scad

@@ -0,0 +1,34 @@
+include <tube.scad>;
+
+/*[Hidden]*/
+designVersion="1.0";
+designer="Andey Belvedersky";
+
+// Ручка
+color([0.5,0.2,0.2]) {
+  union() {
+    // Сама ручка
+    // Толщина 10мм, радиус 40 мм, высота 15мм, разрешение 150
+      // minkowski() {
+    tube(10, 40, 40, 15, 150);
+
+    //sphere(.35, $fn = 20);
+  }
+
+    // Площадка
+    translate([ 40, 0, 7.5 ]) {
+        // minkowski() {
+        cube(center = true, size = [ 10, 20, 15 ], $fn = 150);
+        //    sphere(.35, $fn = 20);
+        //}
+    }
+    // Литник
+    translate([ 39.7, -5, 0 ]) {
+      // minkowski() {
+        cube(center = false, size = [ 25, 10, 15 ], $fn = 100);
+      //  sphere(.35, $fn = 20);
+      // }
+    }
+}
+render();
+

models/cup/tube.scad

@@ -0,0 +1,7 @@
+module tube(thickness, length1, length2, height, fn = 100) {
+    difference() {
+      cylinder(h = height, r1 = length1, r2 = length2, $fn = fn);
+      cylinder(h = height + 0.01, r1 = length1 - thickness,
+               r2 = length2 - thickness, $fn = fn);
+    }
+}

models/garland/box.scad

@@ -0,0 +1,18 @@
+
+
+
+minkowski() {
+    difference(){
+cube([13.5+4,34,7+2],center=true);
+translate([0,2,0]){
+    cube([13.5,34,7],center=true);
+    translate([0,-18.5,0]){
+        cube([4,4,2],center=true);
+    }
+}
+}
+  cylinder(r=0.1, center=false);
+}
+
+
+render();